Laboratory Glassware
Showing 21–30 of 52 results
-
DISTILLATION BEND FOR B-24
“Cowbell” Distillation bent 75 degree adapters. Ideal for use as a stillhead adapter. With Standard Taper inner joints at each end Both joints are of the same size Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM.
-
DISTILLATION FLASK
“Cowbell” distilling flask, also known as a fractional distillation flask or fractioning flask, is a vessel with a round bottom and a long neck from which a side arm protrudes. It is primarily used for distillation, the process of separating a mixture of liquids with different boiling points through evaporation and condensation.
-
DROPPING FUNNEL WITH GLASS STOPPER
“Cowbell” dropping funnel is a glassware used to transfer fluids. They are fitted with a stopcock which allows the flow to be controlled. Dropping funnels are useful for adding reagents slowly, i.e. drop-wise. This may be desirable when the quick addition of the reagent may result in side reactions, or if the reaction is too vigorous.
-
EVAPORATION DISH
“Cowbell” Evaporating Dish or Watch Glass is a piece of laboratory glassware used for the evaporation of solutions and supernatant liquids, [note 1] and sometimes to their melting point. Evaporating dishes are used to evaporate excess solvents – most commonly water – to produce a concentrated solution or a solid precipitate of the dissolved substance.
-
FILTER FUNNEL
“Cowbell”filter funnel is a laboratory funnel used for separating solids from liquids via the laboratory process of filtering. In order to achieve this, a cone-like shaped piece offilter paper is usually folded into a cone and placed within the funnel. The suspension of solid and liquid is then poured through the funnel.
-
FILTRATION FLASK
“Cowbell” Filtering flasks are usually used with some sort of vacuum assembly. The most economical is an aspirator that connects to the kitchen tap. A filter flask can also be used with different types of funnels such thistle tubes, buchner funnels and the like. Filter flasks are used to speed up filtration by connecting a vacuum aspirator to a water tap.
-
GROUND JOINTS
Ground glass joints are used in laboratories to quickly and easily fit leak-tight apparatus together from commonly available parts. This is a large improvement compared with older methods of custom-made glassware, which was time-consuming and expensive, or the use of less chemical resistant and heat resistant corks or rubber bungs and glass tubes as joints, which took time to prepare as well.
-
KIPP’S APPARATUS
The apparatus is usually made of glass, or sometimes of polyethylene, and consists of three vertically stacked chambers, roughly resembling a snowman The prepared gas is usually impure, contaminated with fine aerosol of the reagents and water vapor. The gases may need to be filtered, washed and dried before further use.